General Oceanics Mechanical Flowmeter Model 2030R6 w6-34” Dia. Rotor (94463)

General Oceanics Mechanical Flowmeter

Size : 6-3/4" dia. rotor , 3" dia. rotor

ข้อมูลเฉพาะ

MPN: 2030-R6
UNSPSC: 41114303

Materials: Celcon rotor, nickel-plated brass nose piece, poly-carbonate body, stainless steel main rotor and idler gear shafts, Delrin idler gears, and Delrin and nylon digit wheels. Dimensions: Overall length is 8-3/8˝ with a 1-9/16˝ dia. body. Depth Rating: Unlimited (free flooding). Data Readout: Six 10-digit counter wheels read 000,000 to 999,999; 10 counts per rotor revolution, non-resetting; read by noting difference in start and end readings (counter advances through 000,000). Six-digit full scale count: 999,999 counts equal approximately 14-1/2 nautical miles (1,852 meters/nautical mile). Mounting: Universal bridle allows single point connection for towing or two point connection within net mouth. Response with standard 3˝ dia. rotor: Threshold approx. 10 cm/sec. (1/5 knot).

คำอธิบาย

General Oceanics Mechanical Flowmeter Model 2030R6 w/6-3/4” Dia. Rotor

Model 2030R6 – Flowmeter with gray PVC slow speed, low velocity (6 to 100 cm/sec) 6-3/4˝ dia. rotor

Use in rivers, estuaries, canals, sewer outfalls, pipes, and harbor entrances to determine velocity and distance information or use with plankton nets to determine water volume associated with each tow. Both models incorporate precision molded rotors coupled directly to six digit counters which record each rotor revolution. Supplied with a standard calibration curve (number of counts/unit time vs. velocity) sealed inside transparent body. A single pin and lanyard system located ahead of the lateral center of mass allows the flowmeter to maintain correct dynamic alignment with the fluid flow in which it is immersed.